new product sm8s10 thru sm8s43a www.vishay.com vishay general semiconductor revision: 14-sep-11 1 document number: 88387 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount par ? transient voltage suppressors high temperature stability an d high reliability conditions features ? junction passivation opti mized design passivated anisotropic rectifier technology ?t j = 175 c capability suitable for high reliability and automotive requirement ? available in uni-directional polarity only ? low leakage current ? low forward voltage drop ? high surge capability ? meets iso7637-2 surge specification (varied by test condition) ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. mechanical data case: do-218ab molding compound meets ul 94 v-0 flammability rating base p/nhe3 - rohs compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 he3 suffix meets jesd 201 class 2 whisker test polarity: heatsink is anode note (1) non-repetitive current pulse derated above t a = 25 c primary characteristics v wm 10 v to 43 v p ppm (10 x 1000 s) 6600 w p ppm (10 x 10 000 s) 5200 w p d 8 w i fsm 700 a t j max. 175 c do-218ab maximum ratings (t c = 25 c unless otherwise noted) parameter symbol value unit peak pulse po wer dissi pation with 10/1000 s waveform p ppm 6600 w with 10/10 000 s waveform 5200 power dissipation on infinite heatsink at t c = 25 c (fig. 1) p d 8.0 w peak pulse current wi th 10/1000 s waveform i ppm (1) see next table a peak forward surge current 8. 3 ms single ha lf sine-wave i fsm 700 a operating junction and storage temperature range t j , t stg - 55 to + 175 c
new product sm8s10 thru sm8s43a www.vishay.com vishay general semiconductor revision: 14-sep-11 2 document number: 88387 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? for all types maximum v f = 1.8 v at i f = 100 a measured on 8.3 ms single half sine-wave or eq uivalent square wave, duty cycle = 4 pulses per minute maximum electrical characteristics (t c = 25 c unless otherwise noted) device type breakdown voltage v br (v) test current i t (ma) stand-off voltage v wm (v) maximum reverse leakage at v wm i d (a) maximum reverse leakage at v wm t j = 175 c i d (a) max. peak pulse current at 10/1000 s waveform (a) maximum clamping voltage at i ppm v c (v) min. max. sm8s10 11.1 13.6 5.0 10.0 15 250 351 18.8 sm8s10a 11.1 12.3 5.0 10.0 15 250 388 17.0 sm8s11 12.2 14.9 5.0 11.0 10 150 328 20.1 sm8s11a 12.2 13.5 5.0 11.0 10 150 363 18.2 sm8s12 13.3 16.3 5.0 12.0 10 150 300 22.0 sm8s12a 13.3 14.7 5.0 12.0 10 150 332 19.9 sm8s13 14.4 17.6 5.0 13.0 10 150 277 23.8 sm8s13a 14.4 15.9 5.0 13.0 10 150 307 21.5 sm8s14 15.6 19.1 5.0 14.0 10 150 256 25.8 sm8s14a 15.6 17.2 5.0 14.0 10 150 284 23.2 sm8s15 16.7 20.4 5.0 15.0 10 150 245 26.9 sm8s15a 16.7 18.5 5.0 15.0 10 150 270 24.4 sm8s16 17.8 21.8 5.0 16.0 10 150 229 28.8 sm8s16a 17.8 19.7 5.0 16.0 10 150 254 26.0 sm8s17 18.9 23.1 5.0 17.0 10 150 216 30.5 sm8s17a 18.9 20.9 5.0 17.0 10 150 239 27.6 sm8s18 20.0 24.4 5.0 18.0 10 150 205 32.2 sm8s18a 20.0 22.1 5.0 18.0 10 150 226 29.2 sm8s20 22.2 27.1 5.0 20.0 10 150 184 35.8 sm8s20a 22.2 24.5 5.0 20.0 10 150 204 32.4 sm8s22 24.4 29.8 5.0 22.0 10 150 168 39.4 sm8s22a 24.4 26.9 5.0 22.0 10 150 186 35.5 sm8s24 26.7 32.6 5.0 24.0 10 150 153 43.0 sm8s24a 26.7 29.5 5.0 24.0 10 150 170 38.9 sm8s26 28.9 35.3 5.0 26.0 10 150 142 46.6 sm8s26a 28.9 31.9 5.0 26.0 10 150 157 42.1 sm8s28 31.1 38.0 5.0 28.0 10 150 132 50.1 sm8s28a 31.1 34.4 5.0 28.0 10 150 145 45.4 sm8s30 33.3 40.7 5.0 30.0 10 150 123 53.5 sm8s30a 33.3 36.8 5.0 30.0 10 150 136 48.4 sm8s33 36.7 44.9 5.0 33.0 10 150 112 59.0 sm8s33a 36.7 40.6 5.0 33.0 10 150 124 53.3 sm8s36 40.0 48.9 5.0 36.0 10 150 103 64.3 SM8S36A 40.0 44.2 5.0 36.0 10 150 114 58.1 sm8s40 44.4 54.3 5.0 40 10 150 92.4 71.4 sm8s40a 44.4 49.1 5.0 40 10 150 102 64.5 sm8s43 47.8 58.4 5.0 43 10 150 86 76.7 sm8s43a 47.8 52.8 5.0 43 10 150 95.1 69.4
new product sm8s10 thru sm8s43a www.vishay.com vishay general semiconductor revision: 14-sep-11 3 document number: 88387 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - power derating curve fig. 2 - load dump power characteristics (10 ms exponential waveform) fig. 3 - pulse waveform fig. 4 - reverse power capability thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol value unit typical thermal resistance, junction to case r ? jc 0.90 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode sm8s10ahe3/2d (1) 2.605 2d 750 13" diameter plastic tape and reel, anode towards the sprocket hole 0 2.0 4.0 6.0 8.0 0 50 100 150 200 power di ss ipation (w) ca s e temperature (c) 0 2000 1000 3000 4000 5000 6000 25 50 75 100 125 150 175 load dump power (w) ca s e temperature (c) 0 50 100 150 0 10 20 30 40 input peak pul s e current (%) t - time (m s ) t d t r = 10 s peak value i ppm half value - i ppm i pp 2 t j = 25 c pul s e width (t d ) i s defined a s the point where the peak current decay s to 50 % of i ppm rever s e s urge power (w) 1000 10 000 10 100 pul s e width (m s ) - ? i pp exponential waveform
new product sm8s10 thru sm8s43a www.vishay.com vishay general semiconductor revision: 14-sep-11 4 document number: 88387 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical transient thermal impedance fig. 6 - typical junction capacitance package outline dimensions in inches (millimeters) t - pul s e width ( s ) 100 10 1 0.1 0.01 0.01 0.1 1 10 100 r jc r ja tran s ient thermal impedance (c/w) v wm - rever s e s tand-off voltage (v) 100 000 10 000 1000 10 c j - junction capacitance (pf) 40 35 30 25 20 15 45 mea s ured at s tand-off voltage v wm mea s ured at zero bia s t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p do-218ab mountin g pad layout 0.413 (10.5) 0.374 (9.5) 0.091 (2.3) 0.067 (1.7) 0.116 (3.0) 0.093 (2.4) 0.150 (3.8) 0.126 (3.2) 0.366 (9.3) 0.343 (8.7) 0.606 (15.4) 0.583 (14.8) 0.116 (3.0) 0.093 (2.4) 0.628 (16.0) 0.592 (15.0) 0.539 (13.7) 0.524 (13.3) 0.366 (9.3) 0.343 (8.7) 0.406 (10.3) 0.382 (9.7) 0.342 (8.7) 0.327 (8.3) 0.413 (10.5) 0.374 (9.5) 0.028 (0.7) 0.020 (0.5) 0.138 (3.5) 0.098 (2.5) lead 1 0.098 (2.5) 0.059 (1.5) lead 2/metal heat s ink 0.197 (5.0) 0.185 (4.7) 0.016 (0.4) min.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
